HPE DWDM-SFP10G-48.51-40 Compatible 10G DWDM SFP+ 100GHz Transceiver

Fiber Optic Modules Specifications

HPE Part Number	DWDM-SFP10G-48.51-40	Manufactured by	Fiber Patch Cables U.S.A
Fiber Connector	SFP+	Data Rate	10 Gbps
Wavelength	1548.51nm	Max Working Span	40km
Interface	LC duplex	Optical Components	EML DWDM
Cable Type	Single mode Fiber	Digital Optical Monitoring	YES
TX Power	-1~4dBm	Receiver Sensitivity
Commercial Temperature Range	0 to 70C (32 to 158F)	HTS Code	8517706000

HP 5900 Series Switch (Switch/Module : JG510A)

Spectral Attenuation Measurement

WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).
Conventional WDM systems provide up to 8 channels in the 3rd transmission window (C-Band) of silica fibers around 1550nm.
Dense wavelength division multiplexing (DWDM) uses the same transmission window but with denser channel spacing.
Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing.
Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band).

Fiber Optic Cable Supplier U.S.A

Our compatible fiber optic transceivers products include 100 Mbps fiber transceiver for Fast Ethernet, 155 Mbps fiber transceiver for SDH STM-1/SONET OC-3/ATM, 1.0625 Gbps, 2.125Gbps, 4.25Gbps, and 10Gbps fiber transceiver for Fiber Channel, 1.25 Gbps, 2.5Gbps, 4.25Gbps, and 10Gbps fiber transceiver for Gigabit Ethernet. There are stock of generic fiber optic transceivers available from 100Mbps up to 40Gbps data rate. Transceivers types include SFP Transceiver, GBIC Transceiver, CWDM SFP Transceiver, DWDM SFP Transceivers, SGMII SFP Transceiver, SFP+ Transceiver, XFP Transceiver, X2 Transceivers, Xenpak Transceiver and More. All the fiber optic transceivers are RoHS compliant and can be made 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc. We also have 40G and 100G fiber optic transceivers now, include the QSFP+, CXP and QSFP28, active optical cables and passive optical cables.

Fiber Optic Patch Cables Manufactuer

Get the fiber optic patch cables and transceivers in Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, Canada and the whole North America area, we also ship the goods to worldwide locations from our China factory. Fiber Patch Calbes U.S.A is a manufacturer and supplier of cable fiber optic interconnect transceivers and cable assembly products which serves extensive fiber optic network applications throughout public and private sectors. We believe in high standard professionalism towards our service offerings, and our superior engineering solutions to satisfy each unique needs of our customers, for over the years we support fiber patch cable assemblies, transceivers and fiber optic network components to many clients all over the world.