Fiber Optic Modules Specifications
| Cisco Part Number | DWDM-SFP10G-58.98 | Manufactured by | Fiber Patch Cables U.S.A |
| Fiber Connector | SFP+ | Max Data Rate | 10Gbps |
| Wavelength | 1558.98nm | Max Working Span | 40km |
| Interface | LC duplex | Optical Components | EML DWDM |
| Cable Type | Single mode Fiber | Digital Optical Monitoring | Yes |
| TX Power | -1~4dBm | Receiver Sensitivity | |
| Commercial Temperature Range | 0 to 70C (32 to 158F) | HTS Code | 8517706000 |
Product usage
Cisco DWDM-SFP10G-58.98 is designed to use with so many types of Cisco equipment.
Cisco ASR 9000 A9K-4T16GE-SE Cisco Nexus 7000 N7K-M132XP-12L Cisco WS-C3560CX-12PD-S Cisco WS-C3850-24S Cisco ME-3800X-24cs-M Cisco Nexus 9000 N9K-X9464PX Cisco WS-C3650-48TQ Cisco WS-C4500X-16SFP+ Cisco Nexus 9000 N9K-C9396PX Cisco WS-C3750X-48PF Cisco C6800-16P10G(-XL) Cisco Nexus 7000 N77-F348XP-23 Cisco WS-C3650-48FQ Cisco WS-C4500X-40X-ES Cisco 5700 AIR-CT5760-HA-K9 Cisco Nexus 7000 N77-F248XP-23E Cisco WS-C3650-24PD Cisco 4500 WS-X45-SUP8-E Cisco 5700 AIR-CT5760-250-K9 Cisco Nexus 9000 N9K-C92160YC-X Cisco WS-C3750X-48P Cisco C6800-32P10G(-XL) Cisco ASR 9000 A9K-36X10GE-TR Cisco WS-C2960S-48LPD-L Cisco WS-C3850-24P Cisco WS-X6904-40G-2T Cisco Nexus 3000 N3K-C3048 Cisco WS-C2960XR-24TD-I Cisco WS-C3850-48XS-E Cisco 6800 C6824-X-LE-40G Cisco Nexus 3000 N3K-C3064X Cisco Nexus 9000 N9K-X9564PX Cisco WS-C3650-48PQ Cisco C4KX-NM-8SFP+ Cisco ASR 9000 A9K-4T16GE-TR Cisco WS-C2960S-48FPD-L Cisco WS-C3850-24T Cisco C6800-SUP6T-XL Cisco WS-C2960X-24TD-L Cisco WS-C3850-12XS Cisco C6800-16P10G(-XL) Cisco Nexus 9000 N9K-C9372PX Cisco WS-C3750X-12S Cisco C6800-8P10G(-XL) Cisco ASR 9000 ASR-9001 Cisco Nexus 9000 N9K-C9372PX-E Cisco WS-C3750X-24P Cisco 4900 WS-C4948E Cisco ASR 9000 A9K-36X10GE-SE Cisco WS-C2960S-24TD-L Cisco WS-C3850-48F Cisco C6800-32P10G(-XL) Cisco Nexus 3000 N3K-C3172PQ Cisco WS-C2960X-48FPD-L Cisco WS-C3850-48XS-S Cisco 6800 C6816-X-LE Cisco Nexus 7000 N7K-F248XP-25E Cisco WS-C3650-48TD Cisco 4500 WS-X45-SUP7L-E Cisco 5700 AIR-CT5760-100-K9 | Cisco ASR 9000 A9K-MPA-8X10GECisco Nexus 9000 N9K-C9372PX-ECisco WS-C3750X-24SCisco C6800-SUP6TCisco Nexus 3000 N3K-C3064PQ-10GECisco WS-C2960X-48LPD-LCisco WS-C3850-32XSCisco C6800-SUP6T-XLCisco WS-C2960XR-48LPD-ICisco WS-C3850-48XSCisco ME-3600X-24TS-MCisco WS-C2960X-24PD-LCisco WS-C3850-16XSCisco C6800-8P10G(-XL)Cisco WS-C2960S-48TD-LCisco WS-C3850-48PCisco 6800 C6880-XCisco Nexus 3000 N3K-C31128PQ-10GECisco WS-C2960XR-24PD-I Cisco WS-C3850-48XS-F-ECisco 6800 C6840-X-LE-40GCisco Nexus 7000 N7K-F248XP-25Cisco WS-C3650-24TDCisco 4500 WS-X45-SUP7-ECisco 5700 AIR-CT5760-50-K9Cisco Nexus 9000 N9K-C9372PXCisco WS-C3750X-48TCisco WS-C4500X-24X-ESCisco ASR 9000 A9K-24X10GE-TRCisco Nexus 7000 N77-F348XP-25Cisco WS-C2960X-48TD-LCisco WS-C3850-24XSCisco C6800-SUP6TCisco Nexus 7000 N7K-F132XP-15Cisco WS-C3560CX-8XPD-SCisco 4500 WS-X4712-SFP+ECisco 5700 AIR-CT5760-25-K9Cisco WS-C3650-48FDCisco WS-C4500X-F-32SFP+Cisco 5700 AIR-CT5760-1K-K9Cisco WS-C2960XR-48FPD-ICisco WS-C3850-12SCisco ME-3600X-24cs-MCisco WS-C2960XR-48TD-ICisco WS-C3850-48XS-F-SCisco 6800 C6832-X-LECisco Nexus 7000 N7K-M224XP-23LCisco WS-C3650-48PDCisco WS-C4500X-32SFP+Cisco 5700 AIR-CT5760-500-K9Cisco Nexus 9000 N9K-C9396PXCisco WS-C3750X-24TCisco WS-C4500X-F-16SFP+Cisco ASR 9000 A9K-24X10GE-SECisco WS-C2960S-24PD-LCisco WS-C3850-48TCisco WS-X6904-40G-2TXLCisco Nexus 3000 N3K-C3132Q |
Cisco Nexus 9300 Series (Switch/Module : N9K-C9396PX; Uplink Module : N9K-M12PQ )
Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-8X10GE)
Spectral Attenuation Measurement
WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).
Conventional WDM systems provide up to 8 channels in the 3rd transmission window (C-Band) of silica fibers around 1550nm.
Dense wavelength division multiplexing (DWDM) uses the same transmission window but with denser channel spacing.
Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing.
Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band).
Conventional WDM systems provide up to 8 channels in the 3rd transmission window (C-Band) of silica fibers around 1550nm.
Dense wavelength division multiplexing (DWDM) uses the same transmission window but with denser channel spacing.
Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing.
Dense wavelength division multiplexing (DWDM) refers originally to optical signals multiplexed within the 1550nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifiers (EDFAs), which are effective for wavelengths between approximately 1525–1565nm (C band), or 1570–1610nm (L band).
Fiber Optic Cable Supplier U.S.A
Get the fiber optic patch cables and transceivers in Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming, Canada and the whole North America area, we also ship the goods to worldwide locations from our China factory. Fiber Patch Calbes U.S.A is a manufacturer and supplier of cable fiber optic interconnect transceivers and cable assembly products which serves extensive fiber optic network applications throughout public and private sectors. We believe in high standard professionalism towards our service offerings, and our superior engineering solutions to satisfy each unique needs of our customers, for over the years we support fiber patch cable assemblies, transceivers and fiber optic network components to many clients all over the world.
Fiber Optic Patch Cables Manufactuer
Fiber patch cables U.S.A is a professional fiber optic patch cables products manufacturer,which specialize in the production and marketing of fiber products (like Connectors, Adaptors, Attenuators,Patch cords,Pigtails). These products are mainly used in communication systems, fiber cable connector types include LC,SC,FC,ST,D4,DIN,MU,MPO,MTRJ,SMA,E2000 ect. All the fiber patch cables assemblies we sell are new and top quality, we use the good raw material, all the cables are under strictly quality control,during products the cables are under 100% Insertion Loss, Retrun Loss, End Face and Interference inspection. Our China factory massive production and scientific management system help with cost reduction, we supply all the patch cables with competitive price for every customer, our target is to build long-term mutually beneficial cooperation.
Compatible Fiber Optic Transceivers
Our compatible fiber optic transceivers products include 100 Mbps fiber transceiver for Fast Ethernet, 155 Mbps fiber transceiver for SDH STM-1/SONET OC-3/ATM, 1.0625 Gbps, 2.125Gbps, 4.25Gbps, and 10Gbps fiber transceiver for Fiber Channel, 1.25 Gbps, 2.5Gbps, 4.25Gbps, and 10Gbps fiber transceiver for Gigabit Ethernet. There are stock of generic fiber optic transceivers available from 100Mbps up to 40Gbps data rate. Transceivers types include SFP Transceiver, GBIC Transceiver, CWDM SFP Transceiver, DWDM SFP Transceivers, SGMII SFP Transceiver, SFP+ Transceiver, XFP Transceiver, X2 Transceivers, Xenpak Transceiver and More. All the fiber optic transceivers are RoHS compliant and can be made 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10 etc. We also have 40G and 100G fiber optic transceivers now, include the QSFP+, CXP and QSFP28, active optical cables and passive optical cables.